14 years ago to now in the blink of an eye. Build, but don't forget what you're building for. HBD to my most prized creations.👯‍♀️🥰

Looking for some help this weekend @ModBotArmy and @Steve_Builds

Actually, I'm on a flight out of here in the morning, the installation is going to have to wait a little while but between 12k in my bar and 2 18k units in the shop/studio, should be comfortable when I'm kicked out of the house LOL

ITS ALIVE! finished the Axel's and drivetrain install on the @LDOmotors kit MOG build. Everything seems to be working during the on the jackstands test. Still a ways to go but should be driving soon hopefully! Cheers to all who joined the stream last night!

im on page 400 of the 1000 page manual, and im just blown away how...complex it is yet how well its going together so far Probably not building the camper for it, just going to go with the flatbed, and then have fun putting stuff on it

I’ve dreamed about this day for a while now. Finally decided enough is enough after streaming in the garage in the mid 90’s. I did a ton of research before hand but even with that ran into plenty of issues. It’s officially done and the garage feels incredible 🙌.

I did a ducted mini-split in the house 8 years ago and my new 3 zone for my studio/shop/bar is on its way, so sometime next week I'll be starting that project. 24t, 18t and 12t. Hopefully it stays cool..... Oh, and warm 😁

I ever tell you I LOVE driving in Quebec....

Near miss. No lost paint luckily

Turns out you CAN use ASA for things other than printer parts 🤷.

I follow you for a reason. I was an early early adopter. I was there for the blue tape and allthread rods. But I just think some things ain't worth printing. Again, YMMV

hmmmm $5-7 ASA. 3 hours of time on model and assembly. 6-9 hours print time. or an extra item at the dollar store. Don't get me wrong, I've owned probably 10 printers and have about 4 at the moment.. but C'mon. YMMV

Unlock full-color 3D prints with new Pro PCTG filaments! Learn how strategic layering of cyan, magenta, yellow, and white creates vibrant hues by allowing light transmission. See the magic of color blending. #3DPrinting #Tech

Garage AC changes EVERYTHING. I work in my sound stage and temp control is the difference between good prints and total disasters.

On my list but I really need to insulate my garage first.

Assuming garage walls need to be insulated?

Good luck with the installs! I highly recommend nylog on the flare joints. I just bent the pipe by hand myself but I was nervous the entire time. I kept shifting the pivot point to try not to cause too much strain and it worked out. Also if you avoid horizontal runs I would try